How to avoid common errors when using SMT splice tape? | Shenzhen Kanghongjin Electronics Co., Ltd.

Materials
09 Jun

How to avoid common errors when using SMT splice tape?

When using SMT adhesive tape, it is necessary to avoid the following common errors:

1.Unclean tape:
Before splicing tape, it is necessary to ensure that the tape and the surface of the tape are clean. Multiple accidental touching of the tape during use can cause a decrease in the adhesive strength of the tape, which can easily lead to failure.

2.Adhesive tape for adhesion:
When using the splicie tape, the complete tape should be pressed and there should be no situation where the tape is not attached properly

3.Incorrect specifications
Remember to check if the specifications of the patch tape and the splice tape match when using splicie tape

4.Incorrect position
If you connect the splicing tape to the SMT part in the wrong position, it may cause the connection to be unstable. Ensure that the splicing tape is connected in the correct position to ensure the firmness of the connection.

5.Too much splicing tape

If you use too much splicing tape, it may cause movement during the assembly process. Ensure that only sufficient splicing tape is used to connect SMT parts.

6.Poor tape quality

The tape itself has poor quality, poor adhesion, and a high probability of failure.

KangHongJin offer a range of SMT splice tape solutions to meet the needs of electronics manufacturers.
Our products are made from high-quality materials and designed to be easy to use, ensuring that our customers can improve efficiency and accuracy in their assembly processes.

KANGHONGJIN is committed to providing high-quality SMT splice tape solutions that meet the needs of our customers.

Shenzhen Kanghongjin Electronics Co., Ltd.